A novel in-vitro model of intervertebral disc degeneration using hyperphysiological loading.

Intervertebral disc (IVD) degeneration includes changes in tissue biomechanics, physical attributes, biochemical composition, disc microstructure, and cellularity, which can all affect the normal function of the IVD, and ultimately may lead to pain. The purpose of this research was to develop an in-vitro model of degeneration that includes the evaluation of physical, biomechanical, and structural parameters, and that does so over several load/recovery periods. Hyperphysiological loading was used as the degenerative initiator with three experimental groups employed using bovine coccygeal IVD specimens: Control; Single-Overload; and Double-Overload. An equilibrium stage comprising a static load followed by two load/recovery periods was followed by six further load/recovery periods. In the Control group all load/recovery periods were the same, comprising physiological cyclic loading. The overload groups differed in that hyperphysiological loading was applied during the 4th loading period (Single-Overload), or the 4th and 5th loading period (Double-Overload). Overloading led to a significant reduction in disc height compared to the Control group, which was not recovered in subsequent physiological load/recovery periods. However, there were no significant changes in stiffness. Overloading also led to significantly more microstructural damage compared to the Control group. Taking all outcome measures into account, the overload groups were evaluated as replicating clinically relevant aspects of moderate IVD degeneration. Further research into a potential dose-effect, and how more severe degeneration can be replicated would provide a model with the potential to evaluate new treatments and interventions for different stages of IVD degeneration.

The effect of early weight-bearing and later weight-bearing rehabilitation interventions on outcomes after ankle fracture surgery: A systematic review and meta-analysis of randomised controlled trials.

OBJECTIVE: This systematic review aimed to analyse the effect of early weight bearing versus late weight bearing on rehabilitation outcomes after ankle fractures, which primarily include ankle function scores, time to return to work/daily life and complication rates. METHODS: The China National Knowledge Infrastructure, Wanfang Data Knowledge Service Platform, China Science and Technology Journal, Web of Science, PubMed, Embase and Cochrane Library databases were searched. The focus was on identifying randomised controlled trials centred on early weight-bearing interventions for post-operative ankle fracture rehabilitation. All databases were searched for eligible studies published within the period from database inception to 20 June 2023. The eligible studies were screened according to the inclusion criteria. Study quality was evaluated using the methodology recommended by the Cochrane Handbook for the Systematic Evaluation of Interventions. Two authors independently performed the literature search and data extraction. Eligible studies were subjected to meta-analyses using Review Manager 5.3. Based on the time points at which post-operative ankle function was reported in the studies included in this paper, we decided to perform a meta-analysis of ankle function scores at 6 weeks post-operatively, 12 weeks post-operatively, 24-26 weeks post-operatively and 1 year post-operatively. RESULTS: A total of 11 papers, comprising 862 patients, were included. Meta-analysis indicated that patients receiving early weight-bearing interventions, which referred to weight-bearing for 6 weeks post-operatively, experienced enhancements in ankle function scores (Olerud-Molander score, AOFAS score or Baird-Jackson score) at various post-operative milestones: 6 weeks (SMD = 0.69, 95% CI: 0.49-0.88 and p < 0.01), 12 weeks (SMD = 0.57, 95% CI: 0.22-0.92 and p < 0.01) and the 24-26 weeks range (SMD = 0.52, 95% CI: 0.20-0.85 and p < 0.01). The results of subgroup analyses revealed that the effects of early weight-bearing interventions were influenced by ankle range-of-motion exercises. Additionally, early weight bearing allows patients to return to daily life and work earlier, which was evaluated by time when they resumed their preinjury activities (MD = -2.74, 95% CI: -3.46 to -2.02 and p < 0.01), with no distinct elevation in the incidence of complications (RR = 1.49, 95% CI: 0.85-2.61 and p > 0.05). CONCLUSION: The results showed that early weight bearing is effective in improving ankle function among post-operative ankle fracture patients and allows patients to return to daily life earlier. Significantly, the safety profile of early weight bearing remains favourable, with no higher risk of complications than late weight bearing.

The influence of rotator cuff tear type and weight bearing on shoulder biomechanics in an ex vivo simulator experiment.

Glenohumeral biomechanics after rotator cuff (RC) tears have not been fully elucidated. This study aimed to investigate the muscle compensatory mechanism in weight-bearing shoulders with RC tears and asses the induced pathomechanics (i.e., glenohumeral translation, joint instability, center of force (CoF), joint reaction force). An experimental, glenohumeral simulator with muscle-mimicking cable system was used to simulate 30° scaption motion. Eight fresh-frozen shoulders were prepared and mounted in the simulator. Specimen-specific scapular anthropometry was used to test six RC tear types, with intact RC serving as the control, and three weight-bearing loads, with the non-weight-bearing condition serving as the control. Glenohumeral translation was calculated using instantaneous helical axis. CoF, muscle forces, and joint reaction forces were measured using force sensors integrated into the simulator. Linear mixed effects models (RC tear type and weight-bearing) with random effects (specimen and sex) were used to assess differences in glenohumeral biomechanics. RC tears did not change the glenohumeral translation (p > 0.05) but shifted the CoF superiorly (p ≤ 0.005). Glenohumeral translation and joint reaction forces increased with increasing weight bearing (p < 0.001). RC and deltoid muscle forces increased with the presence of RC tears (p ≤ 0.046) and increased weight bearing (p ≤ 0.042). The synergistic muscles compensated for the torn RC tendons, and the glenohumeral translation remained comparable to that for the intact RC tendons. However, in RC tears, the more superior CoF was close to where glenoid erosion occurs in RC tear patients with secondary osteoarthritis. These findings underscore the importance of early detection and precise management of RC tears.

Validity of spatiotemporal and ground reaction force estimates during resisted sprinting with a motorized loading device.

We aimed to examine the validity of estimating spatiotemporal and ground reaction force (GRF) parameters during resisted sprinting using a robotic loading device (1080 Sprint). Twelve male athletes (age: 20.9 ± 2.2 years; height: 174.6 ± 4.2 cm; weight: 69.4 ± 6.1 kg; means ± SDs) performed maximal resisted sprinting with three different loads using the device. The step frequency and length and step-averaged velocity, anteroposterior GRF (Fap ), and the ratio of Fap to resultant GRF (RF) were estimated using the velocity and towing force data measured using the device. Simultaneously, the corresponding values were measured using a 50-m force plate system. The proportional and fixed biases of the estimated values against those measured using the force plate system were determined using ordinary least product (OLP) regression analysis. Proportional and fixed biases were observed for most variables. However, the proportional bias was small or negligible except for the step frequency. Conversely, the fixed bias was small for step-averaged velocity (0.11 m/s) and step length (0.04 m), whereas it was large for step frequency (0.54 step/s), Fap (16N), and RF (2.22%). For all variables except step frequency, the prediction intervals in the OLP regression dramatically decreased when the corresponding values were smoothed using a two-step moving average. These results indicate that by using the velocity and force data recorded in the loading device, most of the spatiotemporal and GRF variables during resisted sprinting can be estimated with some correction of the fixed bias and data smoothing using the two-step moving average.

Overloading effect on the osmo-viscoelastic and recovery behavior of the intervertebral disc.

In vitro studies investigating the effect of high physiological compressive loads on the intervertebral disc mechanics as well as on its recovery are rare. Moreover, the osmolarity effect on the disc viscoelastic behavior following an overloading is far from being studied. This study aims to determine whether a compressive loading-unloading cycle exceeding physiological limits could be detrimental to the cervical disc, and to examine the chemo-mechanical dependence of this overloading effect. Cervical functional spine units were subjected to a compressive loading-unloading cycle at a high physiological level (displacement of 2.5 mm). The overloading effect on the disc viscoelastic behavior was evaluated through two relaxation tests conducted before and after cyclic loading. Afterward, the disc was unloaded in a saline bath during a rest period, and its recovery response was assessed by a third relaxation test. The chemo-mechanical coupling in the disc response was further examined by repeating this protocol with three different saline concentrations in the external fluid bath. It was found that overloading significantly alters the disc viscoelastic response, with changes statistically dependent on osmolarity conditions. The applied hyper-physiological compressive cycle does not cause damage since the disc recovers its original viscoelastic behavior following a rest period. Osmotic loading only influences the loading-unloading response; specifically, increasing fluid osmolarity leads to a decrease in disc relaxation after the applied cycle. However, the disc recovery is not impacted by the osmolarity of the external fluid.

Per-step and cumulative load at three common running injury locations: The effect of speed, surface gradient, and cadence.

Understanding how loading and damage on common running injury locations changes across speeds, surface gradients, and step frequencies may inform training programs and help guide progression/rehabilitation after injuries. However, research investigating tissue loading and damage in running is limited and fragmented across different studies, thereby impairing comparison between conditions and injury locations. This study examined per-step peak load and impulse, cumulative impulse, and cumulative weighted impulse (hereafter referred to as cumulative damage) on three common injury locations (patellofemoral joint, tibia, and Achilles tendon) across different speeds, surface gradients, and cadences. We also explored how cumulative damage in the different tissues changed across conditions relative to each other. Nineteen runners ran at five speeds (2.78, 3.0, 3.33, 4.0, 5.0 m s-1 ), and four gradients (-6, -3, +3, +6°), and three cadences (preferred, ±10 steps min-1 ) each at one speed. Patellofemoral, tibial, and Achilles tendon loading and damage were estimated from kinematic and kinetic data and compared between conditions using a linear mixed model. Increases in running speed increased patellofemoral cumulative damage, with nonsignificant increases for the tibia and Achilles tendon. Increases in cadence reduced damage to all tissues. Uphill running increased tibial and Achilles tendon, but decreased patellofemoral damage, while downhill running showed the reverse pattern. Per-step and cumulative loading, and cumulative loading and cumulative damage indices diverged across conditions. Moreover, changes in running speed, surface gradient, and step frequency lead to disproportional changes in relative cumulative damage on different structures. Methodological and practical implications for researchers and practitioners are discussed.

Differences and relationships between weightbearing and non-weightbearing dorsiflexion range of motion in foot and ankle injuries.

BACKGROUND: This study aimed to: (1) identify assessment methods that can detect greater ankle dorsiflexion range of motion (DROM) limitation in the injured limb; (2) determine whether differences in weightbearing measurements exist even in the absence of DROM limitations in the injured limb according to non-weightbearing measurements; and (3) examine associations between DROM in the weightbearing and non-weightbearing positions and compare those between a patient group with foot and ankle injuries and a healthy group. METHODS: Eighty-two patients with foot and ankle injuries (e.g., fractures, ligament and tendon injuries) and 49 healthy individuals participated in this study. Non-weightbearing DROM was measured under two different conditions: prone position with knee extended and prone position with knee flexed. Weightbearing DROM was measured as the tibia inclination angle (weightbearing angle) and distance between the big toe and wall (weightbearing distance) at maximum dorsiflexion. The effects of side (injured, uninjured) and measurement method on DROM in the patient groups were assessed using two-way repeated-measures ANOVA and t-tests. Pearson correlations between measurements were assessed. In addition, we analyzed whether patients without non-weightbearing DROM limitation (≤ 3 degrees) showed limitations in weightbearing DROM using t-tests with Bonferroni correction. RESULTS: DROM in patient groups differed significantly between legs with all measurement methods (all: P < 0.001), with the largest effect size for weightbearing angle (d = 0.95). Patients without non-weightbearing DROM limitation (n = 37) displayed significantly smaller weightbearing angle and weightbearing distance on the injured side than on the uninjured side (P < 0.001 each), with large effect sizes (d = 0.97-1.06). Correlation coefficients between DROM in non-weightbearing and weightbearing positions were very weak (R = 0.17, P = 0.123) to moderate (R = 0.26-0.49, P < 0.05) for the patient group, and moderate to strong for the healthy group (R = 0.51-0.69, P < 0.05). CONCLUSIONS: DROM limitations due to foot and ankle injuries may be overlooked if measurements are only taken in the non-weightbearing position and should also be measured in the weightbearing position. Furthermore, DROM measurements in non-weightbearing and weightbearing positions may assess different characteristics, particularly in patient group. LEVEL OF EVIDENCE: Level IV, cross-sectional study.

Adaptation to full weight-bearing following disuse in rats: The impact of biological sex on musculoskeletal recovery.

With the technological advances made to expand space exploration, astronauts will spend extended amounts of time in space before returning to Earth. This situation of unloading and reloading influences human physiology, and readaptation to full weight-bearing may significantly impact astronauts' health. On Earth, similar situations can be observed in patients who are bedridden or suffer from sport-related injuries. However, our knowledge of male physiology far exceeds our knowledge of female's, which creates an important gap that needs to be addressed to understand the sex-based differences regarding musculoskeletal adaptation to unloading and reloading, necessary to preserve health of both sexes. Using a ground-based model of total unloading for 14 days and reloading at full weight-bearing for 7 days rats, we aimed to compare the musculoskeletal adaptations between males and females. Our results reveal the existence of significant differences. Indeed, males experienced bone loss both during the unloading and the reloading period while females did not. During simulated microgravity, males and females showed comparable muscle deconditioning with a significant decline in rear paw grip strength. However, after 7 days of recovery, muscle strength improved. Additionally, sex-based differences in myofiber size existing at baseline are significantly reduced or eliminated following unloading and recovery.

Comparison of the Usefulness of Computer-Assisted Three-Dimensional Analysis and Weight-Bearing Radiographs in Ankle Osteoarthritis.

Background: To evaluate the degree of deformation in patients with ankle osteoarthritis (OA), it is essential to measure the three-dimensional (3D), in other words, stereoscopic alignment of the ankle, subtalar, and foot arches. Generally, measurement of radiological parameters use two-dimensional (2D) anteroposterior and lateral radiographs in a weight-bearing state; however, computer-aided 3D analysis (Disior) using weight-bearing cone-beam computed tomography (CBCT) has recently been introduced. Methods: In this study, we compared the 2D human radiographic method with a stereoscopic image in patients with ankle arthritis. We enrolled 57 patients diagnosed with OA (28 left and 29 right) and obtained both standing radiographs and weight-bearing CBCT. Patients were divided by the Takakura stage. The interclass correlation coefficient (ICC) for each result was confirmed. Results: On the ICC between 2D radiographs and 3D analysis, the tibiotalar surface angle and lateral talo-1st metatarsal angle showed a good ICC grade (> 0.6), while other parameters did not have significant ICC results. Three-dimension was superior to radiographs in terms of statistical significance. Conclusions: We demonstrated that 2D and stereoscopic images are useful for the diagnosis of OA. Our study also confirmed that the radiographic features affected by ankle OA varied. However, according to the results, the typical radiography is not sufficient to diagnose and determine a treatment plan for ankle OA. Therefore, the method of using 3D images should be considered.

Clinical Performance of Glass Ionomer Cement in Load-Bearing Restorations: A Systematic Review.

Glass ionomer cement (GIC) is a self-adhesive dental restorative material composed of a polyacrylic acid liquid and fluoro-aluminosilicate glass powder. It is commonly used for cementation during dental restoration. This study aimed to systematically review the existing literature regarding the clinical performance of GIC in load-bearing dental restorations. A comprehensive literature search was conducted in EBSCO, PubMed, Embrace, and Cochrane databases. Only randomized controlled trials (RCTs) were included in the search, and a broad search technique was used, where inclusion and exclusion criteria were applied. After a thorough evaluation, 12 RCTs were extensively reviewed, and whether GIC is suitable for load-bearing restorations was determined. Significant variations in staining surface or margin, color match, translucency, esthetic anatomical form, retention, material fracture, marginal adaptation, surface luster, occlusal contour, wear, and approximal anatomical form indicated the unsuitability of GIC. By contrast, significance differences in patient view and periodontal response indicated that GIC is suitable. No significant differences in postoperative sensitivity, recurrence of caries, or tooth integrity were observed. Nevertheless, the results of the review demonstrated that the clinical performance of GIC is comparable to that of traditional restorative materials with regard to the parameters analyzed. GIC is a suitable restorative material for load-bearing restorations regarding surface margin, esthetic anatomical form, material retention and fracture, marginal adaptation, occlusal contour, wear, and approximal anatomical form. It reduces other parameters, such as postoperative sensitivity, recurrence of caries, and tooth integrity.

Method of computational design for additive manufacturing of hip endoprosthesis based on basic-cell concept.

Endoprosthetic hip replacement is the conventional way to treat osteoarthritis or a fracture of a dysfunctional joint. Different manufacturing methods are employed to create reliable patient-specific devices with long-term performance and biocompatibility. Recently, additive manufacturing has become a promising technique for the fabrication of medical devices, because it allows to produce complex samples with various structures of pores. Moreover, the limitations of traditional fabrication methods can be avoided. It is known that a well-designed porous structure provides a better proliferation of cells, leading to improved bone remodeling. Additionally, porosity can be used to adjust the mechanical properties of designed structures. This makes the design and choice of the structure's basic cell a crucial task. This study focuses on a novel computational method, based on the basic-cell concept to design a hip endoprosthesis with an unregularly complex structure. A cube with spheroid pores was utilized as a basic cell, with each cell having its own porosity and mechanical properties. A novelty of the suggested method is in its combination of the topology optimization method and the structural design algorithm. Bending and compression cases were analyzed for a cylinder structure and two hip implants. The ability of basic-cell geometry to influence the structure's stress-strain state was shown. The relative change in the volume of the original structure and the designed cylinder structure was 6.8%. Computational assessments of a stress-strain state using the proposed method and direct modeling were carried out. The volumes of the two types of implants decreased by 9% and 11%, respectively. The maximum von Mises stress was 600 MPa in the initial design. After the algorithm application, it increased to 630 MPa for the first type of implant, while it is not changing in the second type of implant. At the same time, the load-bearing capacity of the hip endoprostheses was retained. The internal structure of the optimized implants was significantly different from the traditional designs, but better structural integrity is likely to be achieved with less material. Additionally, this method leads to time reduction both for the initial design and its variations. Moreover, it enables to produce medical implants with specific functional structures with an additive manufacturing method avoiding the constraints of traditional technologies.

Unidirectional titanium fiber-reinforced porous titanium with mechanical properties suitable for load-bearing biomaterials.

Biomaterials for load-bearing implants are expected to exhibit mechanical biocompatibility of low stiffness and high strength for avoiding stress shielding and failure of the implants in vivo, respectively. This study aimed to develop porous titanium (Ti) reinforced with long Ti fibers so that the porous Ti exhibited low Young's modulus and high tensile strength. The unidirectional Ti fiber-reinforced porous Ti with porosities (p) of 40%-58% and volume percentages of Ti fiber (Vf) of 3%-33% has been successfully fabricated via the space holder technique. Mechanical testing revealed that its strength was improved, compared with uniform porous Ti because Ti fibers prevent microscopic damage progress. The porous Ti with p = 40% and Vf = 33% exhibited the strength of 233 MPa and Young's modulus of 26 GPa, which were higher than and comparable to those of natural bones, respectively. Hence, the Ti fiber-reinforced porous Ti exhibited ideal mechanical properties for implant applications.

Load bearing capacity of 3-unit screw-retained implant-supported fixed dental prostheses with a mesial and distal cantilever on a single implant: A comparative in vitro study.

OBJECTIVES: To assess the mechanical durability of monolithic zirconia implant-supported fixed dental prostheses (iFDP) design on one implant, with a distal and a mesial extension cantilever bonded to a titanium base compared to established designs on two implants. MATERIALS AND METHODS: Roxolid Tissue level (TL), and tissue level x (TLX) implants were used to manufacture screw-retained 3-unit iFDPs (n = 60, n = 10 per group), with following configurations (X: Cantilever; I: Implant, T: Test group, C: Control group): T1: X-I-X (TL); T2: X-I-X (TLX); T3: I-I-X (TL); T4: I-I-X (TLX); C1: I-X-I (TL); C2: I-X-I (TLX). The iFDPs were thermomechanically aged and subsequently loaded until fracture using a universal testing machine. The failure load at first crack (Finitial) and at catastrophic fracture (Fmax) were measured and statistical evaluation was performed using two-way ANOVA and Tukey's post-hoc tests. RESULTS: The mean values ranged between 190 ± 73 and 510 ± 459 N for Finitial groups, and between 468 ± 76 and 1579 ± 249 N for Fmax, respectively. Regarding Finitial, neither the implant type, nor the iFDP configuration significantly influenced measured failure loads (all p > 0.05). The choice of implant type did not show any significant effect (p > 0.05), while reconstruction design significantly affected Fmax data (I-I-Xa < X-I-Xb < I-X-Ic) (p < 0.05). The mesial and distal extension groups (X-I-X) showed fractures only at the cantilever extension site, while the distal extension group (I-I-X) showed one abutment and one connector fracture at the implant/reconstruction interface. CONCLUSION: Results suggest that iFDPs with I-X-I design can be recommended regardless of tested implant type followed by the mesial and distal extension design on one implant abutment (X-I-X).

Failure mechanical properties of lumbar intervertebral disc under high loading rate.

BACKGROUND: Lumbar disc herniation (LDH) is the main clinical cause of low back pain. The pathogenesis of lumbar disc herniation is still uncertain, while it is often accompanied by disc rupture. In order to explore relationship between loading rate and failure mechanics that may lead to lumbar disc herniation, the failure mechanical properties of the intervertebral disc under high rates of loading were analyzed. METHOD: Bend the lumbar motion segment of a healthy sheep by 5° and compress it to the ultimate strength point at a strain rate of 0.008/s, making a damaged sample. Within the normal strain range, the sample is subjected to quasi-static loading and high loading rate at different strain rates. RESULTS: For healthy samples, the stress-strain curve appears collapsed only at high rates of compression; for damaged samples, the stress-strain curves collapse both at quasi-static and high-rate compression. For damaged samples, the strengthening stage becomes significantly shorter as the strain rate increases, indicating that its ability to prevent the destruction is significantly reduced. For damaged intervertebral disc, when subjected to quasi-static or high rates loading until failure, the phenomenon of nucleus pulposus (NP) prolapse occurs, indicating the occurrence of herniation. When subjected to quasi-static loading, the AF moves away from the NP, and inner AF has the greatest displacement; when subjected to high rates loading, the AF moves closer to the NP, and outer AF has the greatest displacement. The Zhu-Wang-Tang (ZWT) nonlinear viscoelastic constitutive model was used to describe the mechanical behavior of the intervertebral disc, and the fitting results were in good agreement with the experimental curve. CONCLUSION: Experimental results show that, both damage and strain rate have a significant effect on the mechanical behavior of the disc fracture. The research work in this article has important theoretical guiding significance for preventing LDH in daily life.

3D-Printed Personalized Lattice Implant as an Innovative Strategy to Reconstruct Geographic Defects in Load-Bearing Bones.

OBJECTIVE: Geographic defect reconstruction in load-bearing bones presents formidable challenges for orthopaedic surgeon. The use of 3D-printed personalized implants presents a compelling opportunity to address this issue. This study aims to design, manufacture, and evaluate 3D-printed personalized implants with irregular lattice porous structures for geographic defect reconstruction in load-bearing bones, focusing on feasibility, osseointegration, and patient outcomes. METHODS: This retrospective study involved seven patients who received 3D-printed personalized lattice implants for the reconstruction of geographic defects in load-bearing bones. Personalized implants were customized for each patient. Randomized dodecahedron unit cells were incorporated within the implants to create the porous structure. The pore size and porosity were analyzed. Patient outcomes were assessed through a combination of clinical and radiological evaluations. Tomosynthesis-Shimadzu metal artifact reduction technology (T-SMART) was utilized to evaluate osseointegration. Functional outcomes were assessed according to the Musculoskeletal Tumor Society (MSTS) 93 score. RESULTS: Multiple pore sizes were observed in porous structures of the implant, with a wide distribution range (approximately 300-900 um). The porosity analysis results showed that the average porosity of irregular porous structures was around 75.03%. The average follow-up time was 38.4 months, ranging from 25 to 50 months. Postoperative X-rays showed that the implants matched the geographic bone defect well. Osseointegration assessments according to T-SMART images indicated a high degree of bone-to-implant contact, along with favorable bone density around the implants. Patient outcomes assessments revealed significant improvements in functional outcomes, with the average MSTS score of 27.3 (range, 26-29). There was no implant-related complication, such as aseptic loosening or structure failure. CONCLUSION: 3D-printed personalized lattice implants offer an innovative and promising strategy for geographic defect reconstruction in load-bearing bones. This approach has the potential to match the unique contours and geometry of the geographic bone defect and facilitate osteointegration.

Retrograde intramedullary nailing with supplemental plate and lag screws allows early weight bearing following distal end-segment femur fractures (AO/OTA 33) in a low-resource setting.

PURPOSE: To underline the feasibility of achieving early weight bearing in patients with distal end-segment femur fractures (AO/OTA 33) treated with retrograde intramedullary nailing and supplemental plate or lag screws in the absence of C-arm. METHODS: 41 distal end-segment femur fractures (DFFs) included in the study were treated with SIGN nails with or without a side plate in a center that lacked intraoperative fluoroscopy and fracture table. A medial or lateral para-patellar incision was used for fracture reduction, nail insertion and side plate placement. Follow-ups were done at six weeks, 12 weeks, and six months post-operatively. RESULTS: Distal end-segment fractures constituted 13.2% of all femur fractures treated. The patients' mean age and range were 49.6 and 23-83 years respectively. They were mostly injured in road traffic accidents. 27 were daily-income earners. By the 12th week post-operatively, 82.1% of them could flex their knee beyond 90°, all of them could bear weight fully, and 71.8% could squat & smile. CONCLUSION: The study highlighted the procedure for retrograde nailing of DFFs in a setting without the requisite facilities for minimally-invasive surgeries. The findings demonstrated the feasibility of achieving an expedited weight bearing for the predominantly daily-income-earning victims to ensure early return to work and poverty reduction. While the small sample size is a limitation, the study does provide information that could serve as a basis for future randomized controlled trials in low-resource settings.

Talar neck rotation angle in adults with clubfoot deformity: Observed values and intra- and inter-observer reliability using weightbearing CT.

INTRODUCTION: Adults presenting with symptomatic clubfoot represent a challenging cohort of patients. An appreciation of the location and degree of deformities is essential for management. Talar anatomy is often abnormal with varus within the talar neck, however, there are few reproducible methods which quantify talar neck deformity in adults. We describe a technique of assessing talar neck deformity, and report on observed values and intra- / inter-observer reliability. METHODS: This was a single-centre, retrospective study including 96 feet from 56 adult patients with clubfeet (82 feet had clubfoot deformity, 14 were normal). Mean age was 34.3 ± 16.9 years and 31 (55.3%) were male. Weight-bearing CT scans captured as part of routine clinical care were analysed. Image reformats were oriented parallel to the long axis of the talus in the sagittal plane. In the corresponding axial plane two lines were drawn (on separate slices): 1) a line perpendicular to the intermalleolar axis, 2) a line connecting the midpoints of the talar head and narrowest part of the talar neck. The talar neck rotation angle (TNR angle) was the angle formed between these lines. Intraclass correlation coefficients (ICC) were performed for intra- and inter-observer reliability. RESULTS: Mean TNR angle in clubfeet was 27.6 ± 12.2 degrees (95%CI = 25.0 to 30.2 degrees). Mean TNR angle in normal feet was 18.7 ± 5.1 degrees (95%CI = 16.0 to 21.4 degrees) (p < 0.001). The ICC for clubfeet was 0.944 (95%CI = 0.913 to 0.964) for intra-observer agreement, and 0.896 (95%CI = 0.837 to 0.932) for inter-observer agreement. CONCLUSION: This measurement technique demonstrated excellent intra- and inter-observer agreement. It also demonstrated that compared to normal feet, clubfeet had about 9 degrees of increased varus angulation of the talar neck. This technique and data may be used for future research into clubfoot deformity and in planning treatment. LEVEL OF CLINICAL EVIDENCE: 3.

Immediate Weight-bearing Through Walker or Crutches After Surgical Fixation of Clavicle Fractures in Patients With Lower Extremity Fractures: A Retrospective Cohort Study.

OBJECTIVES: To assess the safety of immediate upper extremity weight-bearing as tolerated (WBAT) rehabilitation protocol after clavicle fracture open reduction internal fixation (ORIF). DESIGN: Retrospective cohort study. SETTING: Three Level 1 trauma centers. PATIENTS SELECTION CRITERIA: Patients older than 18 years who had ORIF of mid-shaft clavicle fractures and lower extremity fractures who were allowed immediate WBAT on their affected upper extremity through use of a walker or crutches were included. All clavicles were fixed with either precontoured clavicular plates or locking compression plates. Included patients were those who had clinical/radiographic follow-up until fracture union, nonunion, or construct failure. OUTCOME MEASURES AND COMPARISONS: WBAT patients were matched in a one-to-one fashion to a cohort with isolated clavicle fractures who were treated non-weight-bearing (NWB) postoperatively on their affected upper extremity. Matching was done based on age, sex, and temporality of fixation. After matching, treatment and control groups were compared to determine differences in possible confounding variables that could influence the primary outcome, including patient demographics, fracture classification, cortices of fixation, and construct type. All patients were assessed to verify conformity with weight-bearing recommendation. Primary outcome was early hardware failure (HWF) with or without revision surgery. Secondary outcomes included postoperative infections and union of fracture. RESULTS: Thirty-nine patients were included in the WBAT cohort; there were no significant differences with the matched NWB cohort based on patient demographics. Both the WBAT and the NWB cohorts had 2.5% chance of acute HWF that required surgical intervention ( P = 1.0). Additionally, there was no difference in overall HWF ( P = 0.49). All patients despite weight-bearing status including those who required revision ORIF for acute HWF had union of their fracture ( P = 1.0). CONCLUSIONS: Our data would support that immediate weight-bearing after clavicle fracture fixation in patients with concomitant lower extremity trauma does not lead to an increase in HWF or impact ultimate union. This challenges the dogma of prolonged postoperative weight-bearing restrictions and allow for earlier rehabilitation. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Energy saving, load bearing and attachment mechanism on ice and frozen ground of biomimetic mechanical foot.

The frozen ground robot can be widely and prospectively applied in plentiful fields, such as military rescue and planet exploration. Based on the energy-saving, load-bearing, and attachment functions of reindeer hooves, we studied the kinematics of reindeer feet and designed a biomimetic energy-saving attachment mechanical foot (mechanical foot I) and two contrast mechanical feet (mechanical feet II and III). The energy-saving and load-bearing performances of the biomimetic mechanical foot were tested on a motion mechanics platform, which revealed this mechanical foot was adaptive to three types of ground (frozen ground, ice, and water ice lunar soil). Mechanical foot I possesses the functions of elastic energy storage and power consumption reduction, and its power range is from -2.77 to -27.85 W. Compared with mechanical foot III, the load-bearing ability of mechanical foot I was improved by the dewclaws, and the peak forces in the X, Y, and Z directions increased by about 2.54, 1.25 and 1.31 times, respectively. When mechanical foot I acted with more- smooth surface, the joint range of motion (ROM) increased, changes of the three-directional force at the foot junction decreased. The forces were the lowest on ice among the three types of ground, the X-, Y- and Z-directional changes were about 62.96, 83.7, and 319.85 N respectively, and the ROMs for the ankle joint and metatarsophalangeal joint of mechanical foot I were about 17.93° and 16.10°, respectively. This study revealed the active adaptation mechanism between the biomimetic mechanical foot and ice or frozen ground, and thus theoretically underlies research on the biomimetic mechanical foot.

Tuning biodegradability, bone-bonding capacity, and wear resistance of zinc-30% magnesium intermetallic alloy for use in load-bearing bone applications.

This work aimed to improve the rapid biodegradation, poor wear resistance properties, and lack of bioactivity of metallic biomaterials to be used in orthopedic applications. In this context, zinc-magnesium (Zn-Mg) alloy with successive contents of calcium silicate (CaSiO3) and silicon nitride (Si3N4) was prepared using powder metallurgy technique. After sintering, their phase composition and microstructure were investigated using the X-ray diffraction technique and scanning electron microscopy (SEM), respectively. Furthermore, their degradation behavior and ability to form hydroxyapatite (HA) layer on the sample surface after immersion in simulated body fluid (SBF) were monitored using weight loss measurements, inductively coupled plasma-atomic emission spectroscopy, and SEM. Moreover, their tribo-mechanical properties were measured. The results obtained showed that the successive contents of CaSiO3 were responsible for improving the bioactivity behavior as indicated by a good formation of the HA layer on the samples' surface. Additionally, ceramic materials were responsible for a continuous decrease in the released ions in the SBF solution as indicated by the ICP results. The tribology properties were significantly improved even after exposure to different loads. Based on the above results, the prepared nanocomposites are promising for use in orthopedic applications.